Note: It may be helpful to print out these instructions before you start to reinsert the secondary transfer roller.
Figure | Step |
---|---|
Figure 1: Align the secondary transfer roller with its slot |
1. Align the secondary transfer roller with its slot. Place the blue side in first. With the pin facing down, as shown in Figure 1, gently press the blue side in until it clicks into place. |
Figure 2: Place the black side in |
2. Rotate the black gear until its pin faces down, as shown in Figure 2. Press it in until it clicks into place. |
Figure 3: Close the right door |
3. Lift up the right door until it clicks into place. This will also lift the secondary transfer roller assembly to the position in which it is fully engaged. |
Please let HP know if this helped you to resolve your issue, and help HP improve service.