Follow the steps listed below to print cleaning page.
Note: It may be helpful to print out these instructions before you start to calibrate the printer.
Figure | Step |
---|---|
Figure 1: Home screen. |
1. Go to the home screen on the touchscreen, then locate the scroll bar on right as shown in Figure 1. |
Figure 2: Touch Device Maintence. |
2. Touch the down arrow on the scroll bar to find DEVICE MAINTENCE. Then touch DEVICE MAINTENCE. |
Figure 3: Touch Calibration/Cleaning. |
3. Find and touch CALIBRATION/CLEANING in the left side menu on the screen. |
Figure 4: Touch Cleaning Page. |
4. Touch the down arrow on the left scroll bar to find CLEANING PAGE. Then touch CLEANING PAGE. |
Figure 5: Touch Print. |
5. Touch Start on the touchscreen as shown in Figure 5. |
Figure 6: Wait for printer checking. |
6. The message CLEANING displays on the top of the screen until the printer finishes cleaning. Note that this will take several minutes. |
Figure 7: Return to Ready state. |
7. The printer returns to Ready state after printer fuser cleaning page. |
Please let HP know if this helped you to resolve your issue, and help HP improve service.