OfficeJet

FAQs

Note: The following content serves as general information and not an authorization from HP. For assistance, please contact HP technical support and for latest product information, please browse / visit the HP store. Refer to Terms & Conditions for more info.

Q1. How to connect HP OfficeJet 250 to WIFI?

Here is a step by step process to connect HP OfficeJet 250 to WIFI:
1. Make sure your HP OfficeJet 250 printer is powered on and connected to the same network as your computer.
2. On your computer, open the printer software.
3. Select the Wireless Setup Wizard option.
4. Follow the on-screen instructions to connect your printer to your wireless network.
5. Once the connection is established, you can print wirelessly from your computer.

Q2. How to connect HP OfficeJet 250 via Bluetooth?

Connect your HP OfficeJet 250 via Bluetooth by following the below steps:
1. Make sure your HP OfficeJet 250 printer is powered on and within range of your Bluetooth device.
2. On your Bluetooth device, open the Bluetooth settings and make sure Bluetooth is enabled.
3. Select “Add a Bluetooth Device” or “Search for Devices”.
4. Select your HP OfficeJet 250 printer from the list of available devices.
5. Enter the passkey or PIN code if prompted.
6. Once the connection is established, you can print from your Bluetooth device.

Q3. Is HP OfficeJet an InkJet printer?

Yes, HP OfficeJet is an InkJet printer.

Q4. How to scan on HP OfficeJet?

You can now scan on HP OfficeJet by just following the below step by step process:
1. Load the document or photo you want to scan onto the scanner glass or into the document feeder.
2. Open the HP Printer Assistant software.
3. Select Scan a Document or Photo.
4. Select the type of scan you want to perform.
5. Select the destination for the scan.
6. Select the scan settings you want to use.
7. Click Scan.
8. When the scan is complete, the scanned image will appear in the HP Printer Assistant software.

Q5. How do I setup my HP OfficeJet printer?

Setup your HP OfficeJet printer by following the below steps:
1. Unpack the printer and all of its components.
2. Connect the power cord to the printer and plug it into an electrical outlet.
3. Turn on the printer.
4. Install the ink cartridges.
5. Load paper into the input tray.
6. Connect the printer to your computer or network.
7. Install the printer driver and software.
8. Print a test page to make sure everything is working properly.