HP DesignJet T210 24-in Printer 2025 Edition

Rated 3 out of 5 by Reed's Drafting from Easy to use and replace rolls Works wonderful & easy to use, but front panel was busted on delivery. Couldn't be without a printer so using it none the less.

Rated 5 out of 5 by Frank’s Construction from HP DesignJet T210 Printer Very pleased with the quality of this printer. It was easy to set up and connect wirelessly to computer. Print quality and speed are very good. This replaced a HP large format printer.

Rated 5 out of 5 by Anonymous from The best printer Very good printer

Rated 5 out of 5 by Sanjay E from Great Purchase Works well thus far! This sentiment is subject to change in the next 4+ months if anything changes.

Rated 3 out of 5 by Kager from Printer is wireless, can't use ethernet connection, difficult setting up, 2 hrs on phone w hp help Difficult setting to connect to computer, no ethernet plug had to buy it, hp support took 2 hrs to figure it out, realizing it is only wireless, won't print clear lines on roll paper..

Rated 4 out of 5 by Anonymous from Owner Works now but I hard wired it to my computer and needed help from HP technical to get it done. Most printers are way easier to hook up

Rated 3 out of 5 by brocbuster from possible The T210 is not as versatile as my old Designjet 130. The display is not designed for elderly. You have to purchase a tray which for the price I paid should have been included. The 130 still worked great "but" HP discontinued the ink and print heads.

Rated 5 out of 5 by Dennis in VA from Good field construction site printer Have been very pleased with this printer. Easy to set up. Have used over 150 feet of 24" roll paper (fast mode) and still on the original ink cartridges. Bought the sheet feeder separately but have not installed it - and may not since I have other printers that can handle 11x17 work. This is a must have printer for field construction sites that need to make C- and D-size prints for subcontractors or to review changes to plans. Am printing .pdf files and the printer manager helps you view how the print orientation will appear on the paper before you actually start the print. Roll feeder is a 2" core - you will need an adapter (3" reduced to 2") if you try to use 3" core rolls. Don't bother with 500' rolls on this printer.