|
» |
|
|
|
|
|
- Print a copy of this Web page and walk over to the printer you are troubleshooting.
- Enter DIAGNOSTIC MODE.
- Press Menus to enter the MENUS on the control panel of the printer.
- Press to highlight DIAGNOSTICS and press .
- Press to highlight DISABLE CARTRIDGE CHECK and press .
- Open the printer and swap the yellow cartridge with the magenta cartridge.
(CAUTION! Do not place the cartridges on the transfer belt.)
- Close the printer.
-
Print another set of PQ troubleshooting pages. Show me how.
- Look at the lower right corner of the test pages number 2 and 3.
Confirm that the test page number 2 is now yellow and the test page number 3 is now magenta.
If this is not true, then you may have swapped the wrong cartridges.
- As illustrated below if the white vertical line(s) now appear(s) on the yellow test page, replace the yellow cartridge with a new yellow cartridge.
Otherwise, contact HP.
- Return the yellow cartridge to the yellow cartridge slot and the magenta cartridge to the magenta cartridge slot.
- To exit this diagnostic test, press and then select EXIT DIAGNOSTICS.
(CAUTION! Failure to exit Diagnostic mode will cause paper jams and other problems when using the printer.)
|