For print service providers
Technology is changing fast, and you don’t want your printing equipment becoming obsolete too quickly. That’s why HP is working hard to extend the life of your printing investments with HP Latex FS printer series—scalable, long-lasting solutions that readily adapt to change.
Stunning quality
Stunning quality
Drive higher margins with up to 30% wider gamut,¹ and print a wide range of signage and décour applications with consistent colour and quality—across your fleet.
Scalable as you grow
Scalable as you grow
Integrate future enhancements with a scalable platform that’s ready to meet evolving needs. Easily upgrade the FS50 printer series with high-capacity 10-litre ink, jumbo dual roll, and extended warranty. Scale as you grow with a single printer investment.
Sustainable with key environmental certifications
Sustainable with key environmental certifications
Stand out with printers that are built to last and meet key environmental certifications. Create a comfortable workspace for employees—and take advantage of recyclable supplies and media.
Explore the HP Latex FS50 printer series
Help save time and money with an intuitive interface featuring guidance for job preparations.
Accelerate your production efficiency with vivid colours at up to 89 m²/hr (958 ft²/hr).³
Reduce interruptions with fully automated printhead maintenance.
Print long runs unattended with single roll up to 300 kg (660 lb) and dual roll up to 2x 200 kg (440 lb).⁴ Jumbo dual roll accessory is optional with the FS50 printer series.
Forget yellowing over time. Plus, avoid repeated maintenance and white ink waste with automatic ink recirculation and offline rotating chamber.⁵ High-capacity 10-litre ink accessory is optional with the FS50 printer series.
Achieve more gamut colours and grow into higher-margin applications.
No hazardous air pollutants,⁶ odourless prints,⁷ recyclable ink carton cardboard,⁸ and eco-conscious media.⁹
Help radically improve efficiency with proactive support, workflow control, and trainings to grow.
Meet the family
This printer is intended to work only with cartridges that have a new or reused HP chip, and it uses dynamic security measures to block cartridges using a non-HP chip. Periodic firmware updates will maintain the effectiveness of these measures and block cartridges that previously worked. A reused HP chip enables the use of reused, remanufactured, and refilled cartridges.¹¹ Contribute to the circular economy with HP Planet Partners¹² and our PVC alternative media profile database.⁹
Open the door to more applications and margins
Open the door to more applications and margins
Stunning quality, scalability, and more
Scale your productivity and optimise costs as your business grows.
FS50
FS50 W
Stunning
quality
Produce a broad range of signage and décour applications—from thin films and vinyl to odourless⁷ backlit textiles.
Scalable
as you grow
Integrate future enhancements with a scalable platform that grows with your business.
Sustainable
with key environmental certifications
Extend the life of your investment with a printer that is built to last.¹⁶
Stunning
quality
Grow into higher margin jobs with up to 30% wider gamut¹ and white ink.
Scalable
as you grow
Meet evolving business needs with built-in scalability.
Sustainable
with key environmental certifications
Water-based inks enable odourless prints⁷ and no hazardous air pollutants.⁶
Discover more about HP Latex Technology
HP Professional Print Service Plans¹⁰
Help radically improve efficiency with proactive support, workflow control, and online training.
Water-based HP Latex inks
Made with up to 65% water, HP Latex Inks are designed to avoid the hazards associated with UV printing, providing outstanding health and safety performance.
Partner solutions
Enable your business to print without limitations with a range of HP and HP partner solutions designed to maximise productivity.
Disclaimers
- Based on testing commissioned by HP and performed by Venture Electronics Spain, comparing the gamuts of HP Latex Gen 4 inks with those of leading competitive alternatives using UV technology. Test performed under the same conditions in all printers measuring the ECI2002 target with the FD-9 spectrophotometer from Konica Minolta.
- While CMYK and Optimiser are duplicated with symmetrical double printheads, the Overcoat, Light Magenta, and Light Cyan rely on single printheads.
- Based on internal HP testing. Outdoor mode 3-pass, 6-colour, 90%. While CMYK and Optimiser are duplicated with symmetrical double printheads, Overcoat, Light Magenta and Light Cyan rely on single printheads.
- HP Latex FS Series Jumbo Dual Roll Kit is bundled with HP Latex FS and HP Latex FS W printer series. Dual roll option must be purchased separately for HP Latex FS and HP Latex FS W printer series.
- Whitest white based on ISO/DIS 23498 compared to top sellers competitive alternatives using UV technology between $100,000 and $200,000 USD as of August 2024. Test performed on black opaque self-adhesive vinyl (L*:2.35 – a:2.73 - b:4.26) with 260% Spot print mode using HP 883 3-litre White Latex Ink Cartridge. Visual opacity = 94.7%. White ink available for HP Latex FS50 W and HP Latex FS60 W printers only. When HP 886 White Latex Printheads are placed in the storage cassettes, no white ink is used for servicing when printheads are not in use.
- HP Latex Inks were tested for Hazardous Air Pollutants, as defined in the Clean Air Act, per U.S. Environmental Protection Agency Method 311 (testing conducted in 2013) and none were detected.
- Based on testing commissioned by HP and performed by Odournet and applicable to HP Latex Inks. Testing conducted according to VDI Guideline 3882 where 832 and 873 inks were characterised as “weak” in odour intensity and “neutral” for hedonic tone. There is a broad set of media with very different odour profiles. Some of the media can affect the odour performance of the final print.
- The ink cartridge HP Eco-Carton outer carton is 100% recyclable through local cardboard/paper programmes. The inner materials including the ink bag and printheads can be returned free of charge to the HP Planet Partners programme for reprocessing of plastic parts. Zero landfill. For ink bag and printhead takeback, visit https://www.hp.com/go/recycle to see how to participate and for HP Planet Partners programme availability; programme may not be available in your jurisdiction. Where this programme is not available, and for other consumables not included in the programme, consult your local waste authorities on appropriate disposal.
- HP applications experts have evaluated the catalogue of media listed in the HP Media Locator based on internal criteria to identify those that provide alternative solutions with certain environmental benefits compared to the typical media within the same application type. The information in media locator is provided by the media substrate vendors. HP is not responsible for the veracity of the information from third-party companies published on the HP website. See https://www.hp.com/go/mediasolutionslocator.
- HP Professional Print Service Plans - Some services depend on printer, service contract, and region availability.
- Learn more at https://www.hp.com/learn/ds.
- Visit https://www.hp.com/go/recycle to see how to participate and for HP Planet Partners programme availability; programme may not be available in your jurisdiction. Where this programme is not available, and for other consumables not included in the programme, consult your local waste authorities on appropriate disposal.
- Based on internal HP testing. Indoor mode 4-pass, 6-colour, 110%.
- Based on internal HP testing. Printed on Clear Self-Adhesive Vinyl, mode spot, 100%.
- Based on internal HP testing. Mode 4-pass, 110%.
- Based on internal HP testing. Stretch performed at room temperature (23°C ± 2°C, 50 % RH ± 5% RH) with an Instron tensiometer, at a jaw separation speed of 300 mm/min. Strips of 200 mm length and 2.5 cm wide. dE calculated according to DELTA E CIE2000. Printed on vinyl cast media, mode 8-pass, 110% ink.
- HP Latex FS50 printer series optional accessories: HP Latex 2700 Series Ink Collector Foams Kit, HP 126-in Dual Roll Kit, HP 126-in Spindle, HP Latex 126-in Roll-to-freefall Kit, HP Latex 2700 Standard Uptime Kit, HP Latex 2700 Series User Maint. Kit, HP Latex 2700 Series Edge Holder Kit, HP Latex FS High Capacity Ink Kit, HP 126-in Dual Roll Spindle, HP Latex Jumbo Dual Roll Split Spindles, HP Latex In-line Slitters, HP Latex Media Saver Kit.